Restoring The Label Application Default Settings; Restoring Factory Default Settings - Dymo XTL 300 User Manual

To change the default barcode
From the Home screen, select
1
Select Default settings and then Default barcode.
2
Select the barcode type to be used as the default and then select Done.
3

Restoring the Label Application Default Settings

From within each label editor you can choose to set the current properties as the
custom default properties for that label type. When custom default properties are
set, you avoid having to step through the label application wizard each time you
create that type of label. See Setting Default Label Properties on page 13.
You use this setting to remove the custom default label properties you previously
set for a label application.
To restore the label application default properties
From the Home screen, select
1
Select Default settings and then Default label properties.
2
Select the label application you want to reset.
3
To restore all label application default properties, select Reset all.
At the confirmation screen, press
4
You will now have to set the properties each time you create a label for this label
type.

Restoring Factory Default Settings

You can remove any custom settings you made and restore the label maker to the
factory default settings. Restoring does not remove your saved labels, favorites, or
transferred files.
To change the restore the factory default settings
From the Home screen, select
1
At the confirmation screen, press
2
®
37 XTL 300
User Guide
.
.
to confirm.
and then select Restore factory settings.
to confirm.