Connecting The Label Maker To Your Computer; Downloading And Installing Dymo Id ™ Software - Dymo XTL 300 User Manual

Connecting the Label Maker to your Computer

The label maker can be used as a standalone label maker or you can print labels
directly from your computer using the latest version of DYMO ID
™
Using DYMO ID software is the recommended method for producing a high-
volume of labels.
Downloading and Installing DYMO ID
Do not connect the label maker to your computer until after the software
installation is complete.
To install the software
Download the latest version of DYMO ID
1
at support.dymo.com.
Follow the instructions in the installer.
2
Connecting the Label Maker to your Computer
The label maker connects to your computer using the USB connection located on
the left side of the label maker.
Do not connect the label maker to
your computer until after the software
installation is complete.
To connect the label maker to your
computer
Lift the connector cover on the left
1
side of the label maker and turn to
expose the connectors.
Plug the USB cable into the USB
2
connector on the label maker and
into an available USB port on your
computer.
The label maker display will show Connected to PC and you will not be able to
use the label maker keypad.
Each time you connect the label maker to the computer, DYMO ID
automatically start.
You can now print directly from DYMO ID
maker for printing later.
®
38 XTL 300
User Guide
™
software.
™
Software
™
software from the DYMO Web site
™
™
software or transfer labels to the label
software will