110-Block Label - Dymo XTL 300 User Manual

One text object is automatically added to the label. You can add an image and a
barcode object to heat-shrink tube labels.
Text size and style apply to all the text on a single line. You can apply different text
sizes and styles to each line of text on the label.
Use serialization to automatically create a series of labels. See Creating a Series
of Labels on page 29.
The following table should help you in choosing the correct label width for your
application.
Heat-shrink Minimum cable
tube size
1/4" (6 mm) 0.05" (1.273 mm)
1/2" (12 mm) 0.10" (2.546 mm)
1" (24 mm) 0.201" (5.093 mm)
The label properties you can set are:
Label
Landscape (Default)
orientation
Portrait
Changing the label orientation removes any content on the label,
creating a new blank label.
Label length Minimum: 1 1/4" (31.75 mm)
Default: 2" (50.8 mm)
Label outline Yes - Show label outline.
No - Hide label outline. (Default)
Leader/trailer Yes - Blank space is equal at the beginning and end of the label. (Default)
match
No - No blank space added at the end of the label.
This property is only available for continuous label cartridges.
To create a heat shrink tube label
From the Home screen, select
1
Follow the steps to configure your label.
2
Add text and formatting.
3

110-Block Label

The 110-block label is one of several datacom specific labels. You enter data into
one of three pre-defined block formats depending on the block type you select.
One text object is automatically added for each block. Barcodes and images
cannot be added to 110-block labels.
Text size and style apply to all blocks on the label and all labels in the file. When
Auto fit text is selected for font size, the text is automatically resized to fit that
block. So you may see differences in text size for each block.
Use serialization to automatically populate the blocks. When all the blocks are filled
on the current label, a new label is created. See Creating a Series of Labels on
page 29.
110-block labels can be printed on any type of continuous labels.
®
18 XTL 300
User Guide
Maximum cable
diameter diameter
0.15" (3.82 mm)
0.301" (7.639 mm)
0.602" (15.279 mm)
Heat-Shrink Tube.
Minimum Maximum
AWG AWG
16 7
10 1
4 4/0+