Datalogic™ Magellan ® Aux Port Configuration; Ncr Bioptic Aux Port Configuration; Wincor Nixdorf Terminal Default Settings - Honeywell Xenon 1910 User Manual

Datalogic™ Magellan
Scan the following Plug and Play code to program the scanner for a Datalogic Magellan auxiliary port configuration. This bar
code sets the baud rate to 9600 bps and the data format to 8 data bits, no parity, 1 stop bit.

NCR Bioptic Aux Port Configuration

Scan the following Plug and Play code to program the scanner for an NCR bioptic scanner auxiliary port configuration. The fol-
lowing prefixes are programmed for each symbology:

Wincor Nixdorf Terminal Default Settings

Scan the following Plug and Play code to program the scanner for a Wincor Nixdorf terminal. This bar code sets the baud rate
to 9600 bps and the data format to 8 data bits, no parity, 1 stop bit.
2 - 6
®
Aux Port Configuration
Datalogic Magellan Settings
Symbology Prefix
UPC-A A
UPC-E E0
EAN-8 FF
EAN-13 F
Code 39 a
NCR Bioptic Settings
Wincor Nixdorf Terminal Settings
Symbology Prefix
Interleaved 2 of 5 b
Code 128 f
GS1 DataBar r
Omnidirecitonal
GS1 DataBar r
Expanded
Codabar N
Code 32 a
Pharmaceutical
(PARAF)