Introduction; Programming The Interface - Plug And Play; Usb Ibm Surepos; Usb Pc Keyboard - Honeywell 4850DR Manual

2
Programming the Interface

Introduction

This chapter describes how to program your document reader for the desired interface.

Programming the Interface - Plug and Play

Plug and Play bar codes provide instant set up for commonly used interfaces.
Note: After you scan one of the codes, power cycle the host terminal to have the interface in effect.

USB IBM SurePos

Scan one of the following "Plug and Play" codes to program the scanner for an IBM SurePos (USB handheld scanner) or IBM
SurePos (USB tabletop scanner) interface.
Note: After scanning one of these codes, you must power cycle the cash register.
USB IBM SurePos
(USB Handheld Scanner)
Interface
Each bar code above also programs the following suffixes for each symbology:

USB PC Keyboard

Scan the following code to program the scanner for a USB PC Keyboard with a CR suffix.

USB HID

Scan the following code to program the scanner for USB HID bar code scanners.
Symbology Suffix
EAN 8 0C
EAN 13 16
UPC A 0D
UPC E 0A
USB HID Bar Code Scanner
Symbology Suffix
Code 39 00 0A 0B
Interleaved 2 of 5 00 0D 0B
Code 128 00 18 0B
Code 39 00 0A 0B
USB IBM SurePos
(USB Tabletop Scanner)
Interface
2 - 1