Selecting Time Format; Selecting Nav Units; Selecting North Reference - Magellan GPS 315 User Manual

Selecting Time Format

SETUP
INITIALIZE
You have the option of changing the format for the time.
NAV SCREENS
COORD SYSTEM
MAP DATUM
ELEV MODE
TIME FORMAT
MENU
NAV UNITS
NORTH REF
LIGHT TIMER
BEEPER
PERSONALIZE
ENTER
CLEAR MEMORY
NMEA
BAUD RATE
SIMULATE
If UTC is selected, the receiver will return to SETUP. If
Figure A. You can
LOCAL 24HR or LOCAL AM/PM are selected, a pop-up
access Time Format
menu will be displayed prompting you to input the correct
from this menu.
time.
TIME FORMAT Default: Local AM/PM
LOCAL 24HR
LOCAL AM/PM
UTC

Selecting NAV Units

Figure B. You can
You can choose the units of measure used by your receiver.
choose from
LOCAL 24HR,
LOCAL AM/PM or
MENU
UTC.
ENTER
NAV UNITS
MILES/MPH
NM/KNOTS
KM/KPH
Default setting is MILES/MPH for land use in the United
States and KM/KPH for land use outside the United States.
Figure C. You can
Default setting is NM/KNOTS for marine use.
choose from
MILES/MPH,

Selecting North Reference

NM/KNOTS and
KM/KPH.
The receiver uses magnetic north as a default reference for
all navigation computation. You can change this to true
NORTH REF
north (good, if you are using a map) or back to magnetic
° TRUE
north (default, good to use if you are using a compass), or
° MAGNETIC
MILS TRUE
mils true or mils mag under SETUP.
MILS MAG
Figure D. You can
MENU
choose from
TRUE, MAG-
.
FIG
NETIC, MILS
D
TRUE or MILS
MAG.
Default setting: MAGNETIC
44
Select
Select
.
FIG
ENTER
A
SETUP
TIME FORMAT
.
FIG
Select
ENTER
B
value
Select
Select
ENTER
SETUP
NAV UNITS
.
FIG
Select
ENTER
C
units
Select
Select
ENTER
SETUP NORTH REF
Select
ENTER
reference
Magellan GPS 315/GPS 320
Input
ENTER
time
ENTER