Selecting A Coordinate System - Magellan GPS 315 User Manual

MENU
WPT NAMES WPT NAMES WPT NAMES
NAV 1
OFF
OFF OFF OFF
ENTER
ON
ON ON ON
Figure A. You can
turn NAV screens
The COMPASS screen is displayed next with the same pop-
on or off.
up menu. You will continue to be prompted for the other
NAV screens.

Selecting a Coordinate System

A coordinate system is provided for you. This option allows
you to select primary and secondary coordinates used for
COORD SYS WPT NAMES WPT NAMES WPT NAMES
entering and viewing position information. The most
OFF OFF OFF PRIMARY
common is LAT/LON.
ON SECONDARY ON ON
Figure B. You can
choose from LAT/
MENU
LON, UTM, TD,
OSGB, Irish,
Swiss, Swedish,
ENTER
Finnish, German,
French, MGRS and
FIG
User Grid.
C
If a format is required for the coordinate system you have
chosen, a pop-up menu will be displayed.
WPT NAMES WPT NAMES WPT NAMES LAT/LON
The default primary coordinate system will be Lat/Lon in
OFF DEG/MIN.MM
Degrees/Minutes and the default secondary coordinate
ON DEG/MIN.MMM
DEG/MIN/SEC
system will be UTM.
Figure C. You
can choose from
DEG/
MIN.MM,
DEGMIN.MMM
or DEG/MIN/
SEC. The
screen will be
different for
other coordinate
systems.
42
Select
ENTER
SETUP
NAV SCREENS
.
FIG Select
ENTER
A
on or off
Select
ENTER
SETUP
COORD SYSTEM
.
FIG
Select
ENTER
B
system
.
Select
ENTER
format
You will want the receiver to use position
coordinates in the same map datum that is used
by your maps.
Magellan GPS 315/GPS 320
Select
Select