As you are working with waypoints, you will notice that the
cities (non-user waypoints) are divided into categories. This
division is based on the population of the city using the
following guidelines:
MENU
Creating a User Waypoint
EDIT WPT
SORT WPT
A waypoint is a recorded position that can be used in a route
DELETE WPT
PROJECTION
or a GOTO. You can save up to 500 user waypoints in your
WAYPOINTS
receiver. You can create a waypoint with a receiver-generated
ROUTES
SETUP
name (WPT001, WPT002, WPTxxx) by pressing:
SUN/MOON
FISH/HUNT
MARK
CONTRAST
ALARM/MSG
To create a waypoint with a name of your choice or if you wish
Figure A. This menu
to change any data field while entering a waypoint, use the
allows you to select
following:
the edit waypoint
mode. Only User
waypoints can be
MARK
edited.
Editing a User Waypoint
EDIT WPT
WPT003
Editing a Selected Waypoint
34˚06.56N
117˚49.60W
From any
900FT
NAV screen
11:23:35PM
12JUN97
NO CAMP
ENTER
FIRES
SAVE EDITS
CLEAR MSG
Editing Waypoint Fields. Follow the instructions on
Figure B. You may
change any of the
selecting a waypoint and use the following to edit the
data fields in this
desired fields.
screen.
FIG
B
24
Major city
500,000+
Large city
100,000 – 500,000
Medium city
20,000 – 100,000
Small city *
Less than 20,000
* available in DataSend CD.
MARK
Make
Select
ENTER
changes
data field
Select
MENU
WAYPOINTS
Select
MENU
waypoint
EDIT WPT
.
Select
ENTER
data field
Magellan GPS 315/GPS 320
ENTER
MARK
Select User
ENTER
category
Select
.
FIG
A
ENTER
Make
ENTER
changes