Selecting The Time Format; Selecting Nav Units; Selecting The North Reference; Setting The Backlight Timer - Magellan iCGRS User Manual

Selecting the Time Format — Enables you to choose from three different
time formats: Local 24 Hr (military time), Local AM/PM or UTC.
From
Any
Screen
Default: Local AM/PM
Selecting NAV Units — Allows you to select the units of measure that will
be used when displaying navigational data. Options are: Miles/Yd/
MPH, Miles/Ft/MPH, NM/Ft/Knots, or KM/KPH.
From
Any
Screen
Default: Miles/Ft/MPH
Selecting the North Reference — Allows the selection of whether the
SporTrak uses True North, Magnetic North, Military True or Military
Magnetic as its North reference.
From
Any
Screen
Default: Magnetic
Setting the Backlight Timer — Allows you to set the time interval that
will be used to turn off the display backlight when not in use. Times
available are: 30 seconds, 1 Minute, 2 Minutes, 4 Minutes, 10 Minutes
or Timer Off.
From
Any
Screen
Default: 4 Minutes
SporTrak Color GPS Mapping Receiver
Highlight
Setup
Select If Local time is selected (24 hr. or
AM/PM) you will be prompted to enter
Format
Highlight
Setup
Select
Nav Units
Highlight
Setup
Select
North
Reference
Highlight
Setup
Select
Timer
Duration
Highlight
Time Format
your local time.
Highlight
Nav Units
Highlight
North Reference
Highlight
Light Timer
Reference
51