Selecting Time Format; Nav Screen Defaults - Magellan Map 410 User Manual

Selecting TIME Format

You may need to correct the current time or change the time format. Your
choices for time format are LOCAL 24HR, LOCAL AM/PM and UTC.
From
any
screen.
Use UP/DOWN
ARROW KEYS to
highlight TIME FORMAT.
The term waypoint is used when your receiver is in the Marine mode and
the term landmark is used in the Land mode.
NAV S D
CREEN
The following chart identifies what the default states are for the nine (9)
NAV screens displayed in your MAP 410. With the exception of the
POSITION screen and SAT STATUS screen, you can turn the NAV screens off
using the procedures found in the Enabling/Disabling the NAV Screens
section of this manual.
28
Use UP/DOWN
ARROW KEYS to
MENU
highlight SETUP.
ENTER
MARK
EFAULTS
NAV Screen
SAT STATUS
POSITION
NAV1
COMPASS
NAV2
MAP
ROAD
SPEED
TIME
Use UP/DOWN
ARROW KEYS to
highlight your choice.
Default ON or OFF
Magellan MAP 410 GPS Receiver
TIME FORMAT
ENTER
LOCAL 24HR
MARK
LOCAL AM/PM
UTC
ENTER
MARK
ON
ON
OFF
ON
ON
ON
OFF
OFF
OFF