Customizing; Selecting Setup; Selecting Initialize; Disabling Nav Screens - Magellan GPS 315 User Manual

Customizing

Selecting Setup

Setup allows you to initialize the receiver and set system
parameters to your preference.
From any
MENU
NAV screen

Selecting Initialize

By initializing your receiver, you establish the initial position
for the receiver. This will enable the receiver to search the
sky for available satellites. You will need to reinitialize if you
have traveled more than 300 miles while the receiver is
turned off. To initialize:
Select
MENU
SETUP
Select
.
FIG
ENTER
F
INITIALIZE
Follow the steps requested to initialize, as done when the
receiver was initialized the first time (see Getting Started).

Disabling NAV Screens

You may find that you do not use one, or more, of the nine
NAV screens provided in the receiver. You have the option
to disable NAV screens, except for the STATUS and
POSITION screens.
Magellan GPS 315/GPS 320
Select
.
FIG
E ENTER
SETUP
ENTER
MENU
COORD SYS
MAP DATUM
ELEV MODE
PROJECTION
TRIP RESET
WAYPOINTS
ROUTES
SETUP
SUN/MOON
FISH/HUNT
CONTRAST
ALARM/MSG
Figure E. Refer to
this screen
anytime you want
to access Setup.
SETUP
INITIALIZE
NAV SCREENS
COORD SYSTEM
MAP DATUM
ELEV MODE
TIME FORMAT
NAV UNITS
NORTH REF
LIGHT TIMER
BEEPER
PERSONALIZE
CLEAR MEMORY
NMEA
BAUD RATE
SIMULATE
Figure F. If you
need to initialize
again, make this
selection.
The default for
the TIME screen
is off.
41