Polycom VVX300 User Manual page 3

Additional screen shots in idle and busy views:
In Idle state softkey reads as:
A = New call
B = Do not disturb
C = Pickup
D = Retrieve
How to use your handset:
Once you have dialled a number, there will be a 3-5 second delay before
connecting the call. This is due to the service awaiting a further command. If
you complete the dialled number then pick-up the handset, press the "dial"
key (left key below screen), press the headset/speakerphone or # key, this
tells the system your number range is complete and will connect the call
without any further delays ie: 0161 123 4567 dial (#)
Answer a Call
Pick up the Handset, or press the Speaker button, or press the Headset button.
Place a call
Dial the number with the handset on hook and after the completion of the
dialled number, pick up the handset/press the headset key/press the dial key or
press the speaker key. Alternatively, pick up the handset (or press the Speaker
or Headset button), dial the number followed by the # or dial button.
Receiving a second call with a call in progress
While first call is active, press the flashing red line button or press the Hold
button to put first call on hold and answer the second call.
Call Hold
To put a call on hold, press the Hold button. The caller hears a series of three
rapid beeps or Music on Hold.
To resume the call, press the Resume soft key or the Hold key again.
Call Transfer
Announced Transfer – Press either transfer key, dial the extension number and
press dial key, announce the call then press transfer key again.
Blind Transfer – Press either transfer key, dial the extension number, select dial,
once ringing press transfer key once more.
Polycom VVX300-310
In busy state softkey / LCD
reads as:
A = Line status (green in call)
B = Call details
C = Hold
D = End Call
E = Transfer
F = More Options
3