Troubleshooting; The Machine Will Not Start; The Machine Loses All Power During A Program; Drying Takes Too Long - Asko T754HP Operating Instructions Manual

Troubleshooting

The machine will not start

Check
• that the door is properly closed.
• that the main power switch is on.
• that the Delayed Start option has not been
selected. To cancel Delayed Start, press the
Stop button for three seconds.
• that the plug is connected.
• that the main fuses have not blown.
The machine loses all power during a
program
Contact the service division.

Drying takes too long

• Check that the lint filter is not blocked. See
the Care and cleaning chapter.
• Empty the condensed water container. Clean
the evaporator filter (net filter + foam filter),
evaporator and lint filter, see chapter Care
and cleaning.

Error messages

If F10 flashes in the display, the condensed
water container is full. Empty the container and
restart the program.
If F29 flashes on the display the evaporator
filter needs cleaning. See the section Care and
cleaning.
If F30 is flashing on the display, the maximum
permitted program time has been reached.
17