Care and cleaning
Cleaning the lint filter
The lint filter must be cleaned after each load.
1. Lift the filter from the holder in the door.
2. Open the lint filter. Use your thumb to press
on the edge as illustrated and pull it out.
14
3. Use your hand or a soft cloth to remove the
lint from all sides of the filter. If necessary,
use a damp sponge and a small amount of
washing-up liquid to remove any deposits.
Dry the filter thoroughly with a towel.
NOTE!
Clean the surface of the lint (fluff) filter after
each drying program.
4. Close the lint filter and put it back in the door.
Close the lint filter before closing the door.