4 - 18 DS3578 With FIPS Digital Scanner Product Reference Guide
Scanner(s) to Cradle Support
NOTE Customers who purchased STB3578 and/or FLB3578 cradles prior to February 1, 2010 (manufacturing
date) and plan to use them in radio communication mode with the DS3578 must download 123Scan
Chapter 11,
Modes of Operation
The charging cradle with radio supports two radio communication modes of operation, allowing the digital scanner
to communicate wirelessly:
•
Point-to-Point
•
Multipoint-to-Point.
Point-to-Point Communication
In Point-to-Point communication mode, the cradle allows one digital scanner to connect to it at a time. In this mode,
the digital scanner is paired to the cradle either by insertion into the cradle (if pairing on contacts is enabled,
4-21), or by scanning the PAIR bar code on the cradle. Communication can be locked, unlocked (default), or in a
lock override state (see
connection maintenance interval bar code beginning on
To activate this mode of operation, scan Point-to-Point.
Multipoint-to-Point Communication
In Multipoint-to-Point communication mode, up to three digital scanners can be paired to one cradle when using a
non-FIPS digital scanner and cradle. When using a FIPS enabled digital scanner and FIPS enabled cradle, you
can pair up to seven digital scanners. See
To activate this mode, the first digital scanner connected to the cradle must scan the Multipoint-to-Point bar code.
This mode allows a parameter broadcast
one digital scanner needs to be programmed.
To select Point-to-Point or Multipoint-to-Point mode, scan the appropriate bar code.
Multipoint-to-Point Mode
123Scan2) and update the digital scanner to the latest firmware revision.
Pairing Modes on page
4-20). In locked mode, locking intervals must be set by scanning a
on page
(page
4-19) that clones all digital scanners paired to the cradle so only
page
4-24.
1-11.
*Point-to-Point Mode
2
(see
page