Edison Installation and Operation Manual
13 Blower Replacement
CONVECTION AXIAL FANS
Before disconnecting the
wire harness from the
convection fans, take note
of which wire goes where
connect back after.
1) Unplug
connectors.
2) Unscrew
the
screws using a 5/16
wrench. Pull on the
fan
housing
handle
until
the
assembly
comes completely out
of the stove.
3) Pull on the fans to
separate them from
the 4 rubber mounts.
In order to reinstall them,
align the four mounting
holes
with
the
rubber
mounts. With your fingers
or with a set of long nose
pliers, pull on each end of
the rubber mount until it
snaps into the blower
housing.
74
the
two