Drolet Edison Installation And Operation Manual page 104

Edison Installation and Operation Manual
Wireless thermostat (AC02012/AC05568)
If you are using a wireless thermostat or a hand held thermostatic remote control, connect
the two thermostat wires to the terminal block located at the rear on the right hand side of
the stove while facing it. If the receiver wires are equipped with quick-connect terminals
you can connect them directly to the stove's wiring harness.
To do so, remove the upper back panel and disconnect wires (B) and (C) attached to the
rear of the terminal block (A). Then, connect them to the receiver.
104