Table of Contents
Advertisement
6.2. Camera Setting
6.2.1. White Balance
The White Balance function corrects the abnormal white color into
the normal white color under any color temperature lighting.
Select the mode among ATW, AWC and Manual. ATW is selected
by default.
WB Mode
ATW
Balances the color automatically depending on the source of light
from 1,800~10,500K color temperature
- Indoor[ATW(I)] : Use this mode in the area under the limited
color temperature.
- Outdoor[ATW(O)] : Use this mode in the area under the broad
color temperature.
AWC:
Set up the lighting to the objects and corrects the right color
temperature to that of a white object. Camera works under the
setup conditions. For the most appropriate condition under the
current illumination, capture the white paper and then change the
mode into AWC. Press the Enter key and then AWC Start will be
displayed. When the adjustment is completed after pressing the
Enter key for AWC Start, go to the upper menu. When conditions
change, adjust the white balance function again
6.2. Camera Setting
101
Advertisement
Table of Contents
