Table of Contents
Advertisement
SNP-3300 30X PTZ Network Camera
3.2. Connecting to Power
AC24V 2.5A can be used for the input power of this product.
Connect the Power Adapter Cable. Use a driver (-) to screw one part
of the Power Adapter consisting of two lines to the holder.
Connect the Power Adapter's plug to the Power Outlet.
Table 3-1. When the resistance value of copper wire is at [20℃(68℉)]
Copper wire size
(AWG)
Resistance value
(Ω/m)
Voltage drop(V/m)
As shown in the Table3-1, voltage decreases as the wire gets
longer. Therefore use of an excessively long adaptor output
line for connection to the camera may affect the performance
of the camera.
※ Standard voltage for camera operation: DC 12V±10%, AC
24V±20%
※ There may be some deviation in voltage drop depending on the
24
#24
#22
(0.22㎟)
(0.33㎟)
0.078
0.050
0.028
0.018
#20
#18
(0.52㎟)
(0.83㎟)
0.030
0.018
0.011
0.06
Advertisement
Table of Contents
