Past Position Display - JRC JMA-7710-6 Instruction Manual

5.4

5.4.2 Past Position Display

Display the position of a target using the
Up to four past position can be displayed. The track mode displays the true or relative track together with the
vector mode.
The relative vector mode displays the relative track of a target.
The true vector mode displays the true track.
Displaying the past position
1. Press the
Procedures
2. Press the
3. Press the
4. Press the
5. Press the
Setting the past position interval
6. Press the
to select "PAST POSITION TIME".
7. Press the
"4MIN".
8. Press the
Exit 9. Press the
SUB
key.
MENU
SUB
key to open the SUB MENU.
MENU
5
key to open the ATA #1 menu.
3
key to select "PAST POSITION".
3
key to select "OFF" or "ON".
ENT
key to set the past position.
4
key in the procedure 3 for displaying the past position
4
key several times to select "30SEC", "1MIN", "2MIN" or
ENT
key to set the past position interval.
SUB
key.
MENU
5 – 15
HL