Displaying Method Of Numerical Data Readouts [Tgt Data] - JRC JMA-7710-6 Instruction Manual

5.5
5.5.2 Displaying Method of Numerical Data Readouts
[TGT DATA]
1. Press the
Procedures
2. Operate the track ball to align the + cursor mark to the target that is to be
numerically displayed (target that is being tracked at present) and press
the
For the target whose ID has already been displayed. Press
9
displayed and press the
The numeric data of the specified target are displayed at the lower right side of the
screen, a symbol is changed to
Subsequently, they are continuously displayed until the target is lost and a vector
disappears or another target is specified. ("A" is displayed for the target without its
number.)
Besides, when specifying the target which is being initially acquired (target to which
the [
target are displayed until the vector is displayed.
Erasing the numeric data display
1. Press the
Procedures
2. Press the
Note
G The cursor must not be positioned on the target.
TGT
key.
DATA
key.
keys to enter the number of the target which has already been
] mark is appended), only the true bearing (T BRG) and range (RNG) of the
TGT
key.
DATA
key.
5 – 19
key.
, and the target ID is displayed near the symbol.
0
to