Fuser Assembly Removal; Fuser Cooling Fan Removal - Lexmark C950 Service Manual

5058-030

Fuser assembly removal

This removal procedure applies to the100V, 110V, and 220V fuser assemblies.
Open the printer left duplex door assembly.
1.
Remove the two thumbscrews (A).
2.
3. Use the handles (B) to pull the fuser assembly out of the machine.

Fuser cooling fan removal

Remove the rear upper cover. See
1.
Disconnect the input option cable (A).
2.
Service Manual
4-78
"Rear upper cover removal" on page 4-16.
Previous
Next
Go Back