Checking The Fluid Levels And Tire Air Pressure; Reading The Manual And Viewing The Safety Training Material - Toro Workman MD Operator's Manual

6. Align the lock tabs of the center cover to the openings
in the steering wheel and press the cover into the wheel
until the locks tabs snap into place
2
Checking the Fluid Levels and
Tire Air Pressure
No Parts Required
Procedure
1. Check the engine oil level before and after the engine is
first operated; refer to
(page 19).
2. Check the brake fluid level before the engine is first
operated; refer to Checking the Brake Fluid Level (page
19).
3. Check the transaxle-fluid level before the engine is first
operated; refer to Checking the Transaxle Oil Level
(page 40).
4. Check the air pressure in the tires; refer to
the Tire Air Pressure (page 21)
3
Reading the Manual and
Viewing the Safety Training
Material
Parts needed for this procedure:
1 Operator's Manual
1 Engine owner's manual
1 Parts Catalog
1 Safety training material
1 Registration Card
1 Predelivery Inspection Form
1 Certificate of Quality
2 Key
Procedure
•
Read the Operator's Manual and Engine owners's manual.
•
View the safety training material.
(Figure 3).
Checking the Engine-Oil Level
Checking
•
Fill out the registration card.
•
Complete the Predelivery Inspection Form.
•
Review the Certificate of Quality.
12