Attaching A Number Plate; Using The Focus Assist Function; Peaking Plus Function - Sony HDVF-L750 Operation Manual

Attaching a Number Plate

Insert the tabs on the sides of the number plate into each
slit in the up-tally lamp.
HDVF-L770
Up-tally lamp
Number plate
(supplied)
Using the Focus Assist
Function
For details on menu operations, see "Using the Menu"
on page 18.

PEAKING PLUS Function

This function can be used to sharpen the edges of an
image that is specified using the color, area selected, or
both. You can also enhance the edges of the entire image.
This function has no effect on the camera's video output
signals.
Note
The PEAKING PLUS function is invalid when
connecting the connecting cable (26-pin).
To sharpen edges by specifying the color
1
Press the ASSIGN. switch that is assigned the
PEAKING PLUS function to switch to the
PEAKING PLUS mode.
The PEAKING PLUS indicator lights up.
You can also set to this mode using "PEAKING
MODE" from the PEAKING menu (see page 21).
2
Select "COLOR" under "COLOR/AREA SEL" of
the PEAKING menu.
3
Press and hold the ASSIGN. switch that is assigned
the PEAKING PLUS function for one second or
more (the detection area marker appears in the center
of the screen), align the color to be corrected in the
detection area marker, and then release the switch.
The color that is to be corrected will be detected.
: Effective edge enhancement area
4
Adjust the effective edge enhancement area of the
color using the following menus in the PEAKING
menu.
Detection
area
marker

Using the Focus Assist Function

15