Attaching Rack Mount Brackets; Exchanging The Number Plate Of The Tally Lamp - Sony XDCU-50 Operating Instructions Manual

Belt bracket attachment screws (XDCA-55)
Belt bracket
(supplied with XDCA-55)
Cable clamp belt (supplied with XDCA-55)
2
Bundle the three connection cables with the cable
clamp belt. Pass the cables so as to make a loop as
illustrated.
3
Adjust the tightening force of the belt to suit the
diameters of the cables.
To this unit
Cable clamp belt (supplied with XDCA-55)
When the camera adapator is the XDCA-53
1
Attach the cable clamp belt (supplied with the
XDCA-53) to the right side (as viewed from the
XDCA-53) of the plate.
Cable clamp belt (supplied with XDCA-53)
Plate
Belt bracket (supplied
with XDCA-53)
18
Preparations and Settings
Belt bracket attachment
screws (XDCA-53)
2
Bundle the three connection cables with the cable
clamp belt. Pass the cables as illustrated.
Adjust the tightening force of the belt to suit the
diameters of the cables.
Cable clamp belt (supplied with XDCA-53)

Attaching Rack Mount Brackets

You can attach the supplied rack mount brackets and
mount this unit on a rack. This allows other devices to be
mounted above and below this unit without impeding
adequate heat dissipation.
Exchanging the Number Plate of the
Tally Lamp
Using a flat-blade screwdriver, you can exchange the
TALLY lamp number plate as shown in the figure below.
To this unit