Sony HDVF-L750 Operation Manual page 25

Page Menu Item
09 ZEBRA/FALSE SELECT
ZEBRA/FALSE
ZEBRA SELECT
ZEBRA1 LEVEL
ZEBRA1
APERTURE
LEVEL
ZEBRA2 LEVEL
a)
If "ASSIGN. 1," "ASSIGN. 2," "ASSIGN. L1," "ASSIGN. L2," "ASSIGN. R1" or "ASSIGN. R2" in the FUNCTION menu is set to
"MAG," the magnified section changes in the sequence CENTER t UPPER t RIGHT t LOWER t LEFT when the respective switch
is held down during a magnified display.
Settings Function
(default in [ ])
[ZEBRA]/FALSE
Switches the support function for setting exposure.
[OFF]/ON Toggles between the normal display (OFF) and the ZEBRA/
FALSE COLOR display (ON).
[1]/2/BOTH Sets the type of ZEBRA display (ZEBRA1, ZEBRA2, or both
of them).
(This function works only when the INPUT switch is set to
SDI. When the INPUT switch is set to CAM, perform the
ZEBRA setting on the menu of the camera.)
Sets the level that displays ZEBRA1.
50% to to
(This function works only when the INPUT switch is set to
107%
SDI. When the INPUT switch is set to CAM, perform the
ZEBRA setting on the menu of the camera.)
Sets the aperture level for ZEBRA1.
1% to to
(This function works only when the INPUT switch is set to
20%
SDI. When the INPUT switch is set to CAM, perform the
ZEBRA setting on the menu of the camera.)
Sets the level that displays ZEBRA2.
52% to to
(This function works only when the INPUT switch is set to
109%
SDI. When the INPUT switch is set to CAM, perform the
ZEBRA setting on the menu of the camera.)
25
Using the Menu