Sony HDVF-L750 Operation Manual page 24

Page Menu
07 PRESET
08 STATUS DISPLAY ASSIGN. 1
24
Using the Menu
Item Settings
(default in [
[OFF]/ON
PRESET
PRST BRIGHT –99 to [0] to 99
–99 to [0] to 99
PRST
CONTRAST
[0] to 100
PRST PEAKING
PRST CHROMA –99 to [0] to 99
OFF/[ON]
ASSIGN. 2 OFF/[ON]
ASSIGN. L1 OFF/[ON]
ASSIGN. L2 OFF/[ON]
ASSIGN. R1 OFF/[ON]
ASSIGN. R2 OFF/[ON]
BRIGHT OFF/[ON]
CONTRAST OFF/[ON]
PEAKING OFF/[ON]
Function
])
For selecting whether to enable the settings of the BRIGHT,
CONTRAST, PEAKING controls and the chroma level in the
FUNCTION menu, or to enable the preset "PRST BRIGHT,"
"PRST CONTRAST," "PRST PEAKING," and "PRST
CHROMA" values in the PRESET menu.
OFF: Enables the settings of the controls and the preset
chroma level in the FUNCTION menu
ON: Enables the PRESET menu settings
For setting the image brightness when "ON" is selected in
"PRESET."
Raising the value increases the brightness of the image.
For setting the image contrast when "ON" is selected in
"PRESET."
Raising the value increases the contrast of the image.
For setting the peaking level when "ON" is selected in
"PRESET."
Raising the value increases the amount of correction.
For setting the chroma level when "ON" is selected in
"PRESET."
Raising the value increases the chroma level.
For selecting whether the changes in the status of the
function assigned to the ASSIGN. 1 switch is displayed (ON)
or not (OFF).
For selecting whether the changes in the status of the
function assigned to the ASSIGN. 2 switch is displayed (ON)
or not (OFF).
For selecting whether the changes in the status of the
function assigned to the ASSIGN. L1 switch is displayed
(ON) or not (OFF). (HDVF-L770 only)
For selecting whether the changes in the status of the
function assigned to the ASSIGN. L2 switch is displayed
(ON) or not (OFF). (HDVF-L770 only)
For selecting whether the changes in the status of the
function assigned to the ASSIGN. R1 switch is displayed
(ON) or not (OFF). (HDVF-L770 only)
For selecting whether the changes in the status of the
function assigned to the ASSIGN. R2 switch is displayed
(ON) or not (OFF). (HDVF-L770 only)
For selecting whether the setting of the BRIGHT control is
displayed (ON) or not (OFF).
For selecting whether the setting of the CONTRAST control
is displayed (ON) or not (OFF).
For selecting whether the setting of the PEAKING control is
displayed (ON) or not (OFF).