Sony HDVF-L750 Operation Manual page 11

3
Holding the handles, move the viewfinder to the
desired height and position.
Height adjustment
10 cm
(4 inches)
Maximum adjustment range: 10 cm (4 inches)
Tilting adjustment
Maximum adjustment range: 90° upward/downward
Panning adjustment
Notes
• The maximum adjustment ranges above are allowed
when the viewfinder is positioned near the camera
operator. To adjust the front-back position of the
mounting wedge or plates, see "Adjusting the Front-
Back Position (HDVF-L770 only)" on page 12.
• Depending on the shape of the connected camera,
panning of the viewfinder may hinder use of the
camera's handle. If the position of the camera's handle
is fixed, adjust the position of the mounting wedge and/
or plates. (See page 12).
4
Turn the tilt-lock knob and lift-lock knob in the
direction of the arrow indicated on each knob
(toward the lock position) to secure the position of
the viewfinder.
HDVF-L750
1
Adjust the height of the viewfinder by loosening the
lift fixing screw, then fix it by fastening.
The height of the viewfinder can be adjusted in 2
levels.
Notes
• Loosen the lift fixing screw while holding the
viewfinder securely with your hand.
• Fasten the lift fixing screws on both sides tightly after
adjusting.
2
Turn the tilt-lock knob in the direction of the arrow
shown below to unlock.
Lift fixing
screw
Tilt-lock knob
Adjusting the Viewfinder Position
11