Inlink (Cec-Compatible) Device - Insignia NS-28D220NA16 User Manual

NS-28D220NA16 28" 720p 60Hz, LED TV

INlink (CEC-compatible) device

Problem Solution
My TV is not
• Make sure that the HDMI cable is
displaying the
connected securely to your TV and
video from
the device.
the connected
• Make sure that the device is
CEC device.
connected to your TV with an HDMI
cable.
• Make sure that the device is a CEC
device. See the documentation that
came with the device for more
information.
• Press INPUT and make sure that the
correct video input source is
selected. See
input source
• Make sure that the INlink feature is
turned on. See
off
• Try adjusting the TV picture. See
Adjusting the TV picture
page 45.
• If the device is not an Insignia
device, it may not be compatible
with your TV.
Selecting the video
on page 36.
Turning INlink on or
on page 39.
on
www.insigniaproducts.com
Problem Solution
My TV is not
• Make sure that the HDMI cable is
playing the
connected securely to your TV and
audio from
the device.
the connected
• Make sure that the device is
CEC device.
connected to your TV with an HDMI
cable.
• Make sure that the device is a CEC
device. See the documentation that
came with the device.
• Make sure that the TV volume is
turned up and not muted.
• Try adjusting the TV sound. See
Adjusting sound settings
page 47.
• Make sure that the TV speakers are
turned on and not muted. See
Adjusting sound settings
page 47.
• Make sure that the INlink feature is
turned on. See
off on page 39.
• If you have connected an HDMI CEC
audio receiver, adjust the volume on
the receiver. When your TV detects
an audio receiver, the TV speakers
turn off and sound plays through
receiver speakers only.
• If the device is not an Insignia
device, it may not be compatible
with your TV.
• If you are using a home theater
system, sound bar, or external
speaker system, make sure that it is
turned on and is not muted.
• If you are using a home theater
system, sound bar, or external
speaker system, make sure that you
have selected the correct output
mode.
• If you are using a home theater
system, sound bar, or external
speaker system and have connected
with a digital cable, go to the Audio
menu, highlight Digital Audio
Format/Audio Delay, then press
ENTER. Set the Audio Format
option to PCM. See the Digital
Audio Format/Audio Delay option
in Adjusting sound settings
page 47.
on
on
Turning INlink on or
on
69