Insignia NS-28D220NA16 User Manual page 74

Problem Solution
My TV's
• Make sure that there are no
remote
obstructions between the remote
control does
control and the remote control
not control
sensors on your TV and the device.
the device.
• Depending on the device, all the
buttons may not work.
• Make sure that the INlink feature is
turned on. See
off
• If you are trying to control the
volume on an HDMI CEC audio
receiver using your TV remote
control, make sure that the TV
Speakers option on the Audio
menu is set to On. See
sound settings
• If you are trying to control the
volume on an HDMI CEC audio
receiver using your TV remote
control, make sure that the Audio
Receiver option on the INlink menu
is set to On. See
Receiver on or off
• The device may not support this
feature. See the documentation that
came with the device for more
information.
The device
• Make sure that the device is turned
does not show
on.
up in the
• Make sure that the HDMI cable is
INlink Device
connected securely to your TV and
list.
the device.
• Make sure that the device is
connected to your TV with an HDMI
cable.
• Make sure that the INlink feature is
turned on. See
off
• Make sure that the device is a CEC
device. See the documentation that
came with the device.
• If the device is not an Insignia
device, it may not be compatible
with your TV.
My device
• Make sure that the INlink feature is
does not turn
turned on. See
off when I turn
off
off my TV.
• Make sure that Device Auto Power
Off is set to On on the INlink menu.
See
on or off
• The device may not support this
feature. See the documentation that
came with the device for more
information.
70
Turning INlink on or
on page 39.
Adjusting
on page 47.
Turning Audio
on page 40.
Turning INlink on or
on page 39.
Turning INlink on or
on page 39.
Turning Device Auto Power Off
on page 39.
www.insigniaproducts.com
Problem Solution
My TV does
• Make sure that the INlink feature is
not turn on
turned on. See
when I turn on
off on page 39.
my device.
• Make sure that TV Auto Power On
is set to On on the INlink menu. See
Turning TV Auto Power On on or off
on page 40.
• The device may not support this
feature. See the documentation that
came with the device for more
information.
The Audio
• When Audio Receiver is set to Off
Receiver
and INlink Control is set to On and
setting on the
you make an adjustment to the
INlink menu
audio receiver (for example, turn the
keeps turning
volume knob or press a button),
back on after
Audio Receiver is automatically set
it is turned off.
to On. To prevent this from
happening, turn off the INlink
feature. See
on page 39.
Two volume
• When you adjust the volume on the
bars appear
audio receiver or with the TV remote
when
control, a double volume bar
adjusting the
appears, one for the TV volume and
volume.
one for the audio receiver volume.
I cannot select
• The device may not support this
the Root
feature. See the documentation that
Menu option
came with the device for more
on the INlink
information.
menu.
OR
The device's
root menu
does not open
when I select
Root Menu
on the INlink
menu.
Note
If the problem is not solved by using these
troubleshooting instructions, turn off your
TV, then turn it on again.
28" 720p 60Hz, LED TV
Turning INlink on or
Turning INlink on or off