CHILD SAFETY PROPER TELEVISION PLACEMENT MATTERS THE CONSUMER ELECTRONICS INDUSTRY CARES • Manufacturers, retailers and the rest of the consumer electronics industry are committed to making home entertainment safe and enjoyable. • As you enjoy your television, please note that all televisions—new and old—must be supported on proper stands or installed according to the manufacturer's recommendations.
Important Safety Instructions 14 Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or CAUTION objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, RISK OF ELECTRIC SHOCK does not operate normally, or has been dropped.
NS-28D220NA16 Replacement parts 1 Antenna lead-in wire When replacement parts are required, make sure that the service technician uses replacement parts 2 Grounding clamp specified by the manufacturer that have the same Antenna discharge characteristics as the original part. Unauthorized...
No setup is needed! CEC Congratulations on your purchase of a high-quality technology lets different devices discover and Insignia product. Your NS-28D220NA16 represents communicate with each other. (See page the state of the art in LED TV design and is designed instructions on how to use INlink.)
NS-28D220NA16 28" 720p 60Hz, LED TV Installing the stands or wall-mount bracket • If you want to place your TV on a table or in an entertainment center, go to Installing the stands. • If you want to mount your TV on a wall, go to Installing a wall-mount bracket.
28" 720p 60Hz, LED TV Installing a wall-mount bracket Warnings • Your TV has four VESA mounting holes on the back. If you attach a wall-mount bracket to the back of your TV, the bracket must be securely attached, using all four holes. If you do not use all four mounting holes, your TV may fall and cause property damage or personal injury.
Page 11
NS-28D220NA16 28" 720p 60Hz, LED TV 3 Attach the wall-mount bracket to your TV using the mounting holes on the back of your TV. See the instructions that came with the wall-mount bracket for information about how to correctly hang your TV.
28" 720p 60Hz, LED TV TV components Front features This section contains information about: • Package contents • Front features • TV buttons • Side jacks • Back jacks • Remote control Package contents • 28-inch LED TV • Remote control and batteries (2 AAA) •...
NS-28D220NA16 28" 720p 60Hz, LED TV TV buttons Item Press to... Press to open the on-screen menu. For more information, see 1 MENU Navigating the menus page 38. Press to open the Input Source list, press CH or CH...
28" 720p 60Hz, LED TV Side jacks Item Description Connect headphones, a sound bar, analog speaker system, or a home theater system to this jack to listen to TV audio through external /AUDIO OUT speakers. For more information, see Connecting headphones page Analog audio page 29.
NS-28D220NA16 28" 720p 60Hz, LED TV Back jacks # Item Description Plug the AC power adapter into 1 DC IN this connector. Connect the audio for a component video device to these jacks. For more information, see Component video (better)
28" 720p 60Hz, LED TV Remote control Button Press to... Set the sleep timer. You can select Off, 5, 10, 15, 30, 60, 90, SLEEP 120, 180, or 240 minutes. See Setting the sleep timer page 61. INlink—Control INlink-compatible (HDMI CEC) devices. See Using INlink on page 39.
NS-28D220NA16 28" 720p 60Hz, LED TV What connection should I Connection type and Cable connectors use? jack Your TV has several connection types for connecting Coaxial digital devices to your TV. audio output For the best video quality, you should connect a device to the best available connection.
28" 720p 60Hz, LED TV Connecting a cable or satellite box Many cable or satellite TV boxes have more than one connection type. To get the best video, you should use the best connection type available. For more information, see What connection should I use? on page 13.
NS-28D220NA16 28" 720p 60Hz, LED TV Component video (better) Note Cables are often color-coded to match color-coded jacks. Cable or satellite box Audio cable On your TV Component video cable Component Audio cable video cable connectors connectors Component Analog Back of TV...
28" 720p 60Hz, LED TV AV (composite video) (good) Notes • Cables are often color-coded to match color-coded jacks. • The yellow video connector on the AV cable connects to the green VIDEO / Y jack. Cable or satellite box On your TV AV cable AV cable...
NS-28D220NA16 28" 720p 60Hz, LED TV Coaxial (good) Cable Cable or wall jack satellite box On your TV Coaxial cable Coaxial cable connector ANT / CABLE jack Back of TV 1 Make sure that your TV’s power adapter is unplugged and all connected devices are turned off.
28" 720p 60Hz, LED TV Connecting an antenna or cable TV (no box) Antenna or cable TV (no box) On your TV Coaxial cable Coaxial cable connector ANT / CABLE jack Back of TV 1 Make sure that your TV’s power adapter is unplugged and all connected devices are turned off. 2 Connect a coaxial cable (not provided) to the ANT / CABLE jack on the back of your TV and to the antenna or cable TV wall jack.
NS-28D220NA16 28" 720p 60Hz, LED TV Connecting a DVD or Blu-ray player Many DVD or Blu-ray players have more than one connection type. To get the best video, you should use the best connection type available. For more information, see What connection should I use? on page 13.
28" 720p 60Hz, LED TV Component video (better) Note Cables are often color-coded to match color-coded jacks. DVD or Blu-ray player Audio cable On your TV Component video cable Component Audio cable video cable connectors connectors Component Analog Back of TV video jacks audio jacks 1 Make sure that your TV’s power adapter is unplugged and the DVD or Blu-ray player is turned off.
NS-28D220NA16 28" 720p 60Hz, LED TV AV (composite video) (good) Notes • Cables are often color-coded to match color-coded jacks. • The yellow video connector on the AV cable connects to the green VIDEO / Y jack. DVD or Blu-ray...
28" 720p 60Hz, LED TV Connecting a game console Many game consoles have more than one connection type. To get the best video, you should use the best connection type available. For more information, see What connection should I use? on page 13.
NS-28D220NA16 28" 720p 60Hz, LED TV Component video (better) Note Cables are often color-coded to match color-coded jacks. Game console Console-specific component video and audio cable On your TV Component Audio cable video cable connectors connectors Component Analog Back of TV...
28" 720p 60Hz, LED TV AV (composite video) (good) Notes • Cables are often color-coded to match color-coded jacks. • The yellow video connector on the AV cable connects to the green VIDEO / Y jack. Game console On your TV Console-specific AV cable AV cable Audio cable...
NS-28D220NA16 28" 720p 60Hz, LED TV Connecting a computer Side of TV On your TV HDMI cable connector HDMI cable HDMI jack 1 Make sure that your TV’s power adapter is unplugged and the computer is turned off. 2 Connect an HDMI cable (not provided) to an HDMI jack on the side of your TV and to the HDMI OUT jack on the computer.
28" 720p 60Hz, LED TV Connecting a USB flash drive You can use the USB jack on your TV to view photos on a USB flash drive. Side of TV USB flash drive 1 Plug a USB flash drive into the USB port on the side of your TV. Caution Do not remove the USB flash drive or turn off the TV while using the USB flash drive.
NS-28D220NA16 28" 720p 60Hz, LED TV Connecting headphones When you connect headphones, the TV speakers are muted. Warning Loud noise can damage your hearing. When using headphones, use the lowest volume setting on your headphones that still lets you hear the sound.
28" 720p 60Hz, LED TV Connecting external speakers or a sound bar You can connect external speakers using: • Digital audio • Analog audio Digital audio Side of TV Digital speaker system On your TV Sound bar Digital coaxial cable connector Digital coaxial audio jack...
NS-28D220NA16 28" 720p 60Hz, LED TV Analog audio When you connect an analog system or sound bar to the /AUDIO OUT jack, the TV speakers are muted. Side of TV On your TV Audio cable Audio cable connector Analog speaker system...
28" 720p 60Hz, LED TV Connecting a home theater system with multiple devices You can connect an AV receiver and your devices to create a home theater. Cable or satellite box DVD or Blu-ray player AV receiver Antenna or cable TV connected directly to the wall jack The connections you make depend on the video and audio jacks available on your devices.
NS-28D220NA16 28" 720p 60Hz, LED TV Connecting power You should connect devices before your connect the power adapter. When you are adding devices, make sure that the power adapter is unplugged from the power outlet. 1 Connect the power adapter to the DC IN connector on the back of your TV.
28" 720p 60Hz, LED TV Using the remote control 3 Replace the battery compartment cover. Cautions This section covers: • Batteries should not be exposed to excessive heat, such as sunshine, heat • Installing remote control batteries registers, or fire. •...
NS-28D220NA16 28" 720p 60Hz, LED TV Programming universal remote controls Viewing universal remote control codes You can operate your Insignia TV with a new or You can view a list of universal remote control codes existing universal remote control. in the on-screen menu.
28" 720p 60Hz, LED TV Turning on your TV for the 4 Press to highlight Home Use Mode or Store Display Mode, then press ENTER. first time If you selected Store Display Mode, a message asks if you are sure you want this mode. Select OK to continue using Store Display Mode, or select The first time you turn on your TV, the Easy Setup Cancel to automatically change to Home Use...
Page 39
NS-28D220NA16 28" 720p 60Hz, LED TV 7 Press to select On to turn on Daylight 12 If you select a preset label, press to select Next, Saving or Off to turn off Daylight Saving, then then press ENTER.
28" 720p 60Hz, LED TV • If you select Cable from the wall or Antenna Turning your TV on or off your TV starts scanning for channels and 1 Make sure that the power adapter is connected to displays a progress screen. a power outlet.
NS-28D220NA16 28" 720p 60Hz, LED TV On-screen menu overview Settings menu (TV mode) Notes • Depending on the signal source selected, you may see different options on your screen. • Menu items that are not selectable are grayed out. Picture menu (TV mode)
28" 720p 60Hz, LED TV Navigating the menus Selecting a channel • Press CH or CH to go to the next or previous Press MENU to open the on-screen menu. channel on the memorized channel list. • Press the number buttons to enter the channel number you want, then wait for the channel to change or press ENTER to immediately change the channel.
NS-28D220NA16 28" 720p 60Hz, LED TV Using INlink 4 Press to highlight INlink Control, then press ENTER or 5 Press to highlight On or Off, then press INlink lets you control HDMI CEC-compatible devices ENTER.
28" 720p 60Hz, LED TV Turning TV Auto Power On on or off Turning Audio Receiver on or off TV Auto Power On automatically turns on your TV When INlink is turned on and you have connected an when an HDMI CEC device is turned on, if the device HDMI CEC-compatible audio receiver to your TV, has this feature.
NS-28D220NA16 28" 720p 60Hz, LED TV Displaying a list of INlink-compatible devices Selecting an INlink-compatible device You can display a list of HDMI CEC devices that are When you have more than one INlink-compatible connected to your TV. device connected, you can select the device you want to use.
28" 720p 60Hz, LED TV Using a USB flash drive Opening an INlink-compatible device’s root menu You can open an INlink-compatible device’s root You can connect a USB flash drive to your TV to view menu, then use your TV’s remote control to control compatible JPEG pictures.
NS-28D220NA16 28" 720p 60Hz, LED TV Browsing photos When a photo is displayed full-screen, a control bar appears at the bottom of the photo. The file 1 Switch to USB mode. See Switching to USB mode name, picture resolution, size, and date are on page 42.
28" 720p 60Hz, LED TV Viewing favorite photos Viewing photos in a slideshow After you create your favorite photo list, you can You can view your photos in a slideshow. browse among your favorite photos quickly. 1 Switch to USB mode. See Switching to USB mode 1 Switch to USB mode.
NS-28D220NA16 28" 720p 60Hz, LED TV Adjusting the picture 3 Press to highlight an option, then press ENTER or to access the option. You can select: • Picture Mode—Selects the picture mode. You This section covers: can select: •...
28" 720p 60Hz, LED TV • Aspect Ratio—Adjusts how the picture fills • Backlight—Sets the overall brilliance of the the screen. You can select: screen. • Brightness—Adjusts the brightness of the dark Aspect ratio areas of the picture. Example options •...
NS-28D220NA16 28" 720p 60Hz, LED TV Adjusting the sound Setting the power on picture mode You can set the picture mode your TV uses when you turn it on. This section covers: 1 Press MENU. • Adjusting sound settings ...
28" 720p 60Hz, LED TV • TV Speakers—Selects where to play TV audio. • Headphones/Audio Out—You can use the When you connect headphones to your TV, /AUDIO OUT jack on the side of your TV to audio plays through both the headphones and connect headphones, a home theater system, the TV speakers.
NS-28D220NA16 28" 720p 60Hz, LED TV Changing channel settings Playing TV audio only You can turn off the picture on your TV and listen to the program audio only. This section covers: 1 Press MENU. • Automatically scanning for channels ...
Page 54
28" 720p 60Hz, LED TV A If you select Cable/Satellite Box, the screen C If you select Antenna, your TV scans for that opens shows you all the ways you can available channels. The scan may take several connect a box to your TV. minutes.
NS-28D220NA16 28" 720p 60Hz, LED TV Hiding channels Setting up a favorite channel list You can hide channels in the channel list. When you You can create a favorite channel list so you can press CH or CH , your TV skips the hidden quickly browse through your favorite channels by channels.
28" 720p 60Hz, LED TV Viewing a favorite channel 5 Press to select a character, then press to move to the previous or next character 1 Press FAVORITE. The Favorite List opens. position. Repeat this step to enter additional ...
NS-28D220NA16 28" 720p 60Hz, LED TV Setting TV parental controls 4 Press the number buttons to enter the four-digit password. The default password is 0000. You should change the password to a number you can Parental controls let you prevent your children from remember.
28" 720p 60Hz, LED TV Blocking unrated TV Setting parental control levels Some TV programs, such as news and sports shows You can set parental controls for the U.S. and Canada. are not rated. When Block Unrated TV is turned on, U.S.
Page 59
NS-28D220NA16 28" 720p 60Hz, LED TV 5 Press to highlight USA Parental Locks, Canadian French ratings then press ENTER. (To set Canadian ratings, select Exempt programming Canadian Parental Locks.) General audiences USA Parental Locks 8 ans+ Suitable for children 8 and older...
28" 720p 60Hz, LED TV Downloading rating information 5 Press to highlight RRT5, then press ENTER. The screen that opens may vary depending on the If the program you are viewing has downloadable broadcaster. rating information, you can download the information to use when setting parental controls.
NS-28D220NA16 28" 720p 60Hz, LED TV Using closed captioning Locking control buttons When the button lock is turned On, the buttons on the side of your TV are locked, and you can only Closed captioning displays a text version of the TV operate your TV using the remote control.
28" 720p 60Hz, LED TV Selecting the analog closed captioning mode Selecting the digital closed captioning mode Analog channels usually have one or more closed Digital channels usually have one or more closed captioning modes. The CC1 mode usually displays a captioning modes.
NS-28D220NA16 28" 720p 60Hz, LED TV Customizing digital closed captioning settings 4 Press to highlight Digital CC Settings, then press ENTER or 1 Press MENU. 2 Press to highlight SETTINGS, then press or ENTER.
28" 720p 60Hz, LED TV Adjusting time settings 4 Press to highlight Date / Time, then press ENTER. This section includes: • Setting the clock • Setting the sleep timer Setting the clock If you skipped the steps in the Easy Setup wizard for setting the date and time or if you move your TV to a different time zone, you can reset the clock to the correct time.
NS-28D220NA16 28" 720p 60Hz, LED TV Adjusting menu settings Setting the sleep timer You can specify the amount of time before your TV automatically turns off. You can adjust how the TV menus look by: 1 Press MENU. • Selecting the menu language ...
28" 720p 60Hz, LED TV Turning Input Sensor on or off Labeling an input source When the Input Sensor feature is turned on, your TV You can add a label to an input source to make it automatically detects which video jacks have devices easier to identify.
NS-28D220NA16 28" 720p 60Hz, LED TV Maintaining 3 Press to highlight System Info, then press ENTER or 4 If your TV uses open source code, press ENTER to • Do not use your TV in areas that are too hot or too display the open source code information.
2 Press to highlight HELP, then press Guide on the Insignia website to download the ENTER. firmware update and copy it to a USB flash drive. 4 Plug the USB flash drive into the USB port on the side of your TV.
NS-28D220NA16 28" 720p 60Hz, LED TV Restoring settings to the defaults Video and audio When you restore default settings, all the settings you Problem Solution have customized (except parental controls) are reset. 1 Press MENU. Picture does • Press ASPECT to change the aspect not fill the ...
Page 70
28" 720p 60Hz, LED TV Problem Solution Problem Solution Dark, poor, or Only snow • Try another channel. The station • Try another channel. The station no picture (noise) may be experiencing problems. may be experiencing problems. (screen is lit), appears on •...
NS-28D220NA16 28" 720p 60Hz, LED TV Problem Solution Problem Solution The picture Audio noise. • A few bright or dark spots on an LCD • Other devices (for example, a has a few screen is normal. It does not affect...
28" 720p 60Hz, LED TV Problem Solution Problem Solution Trouble One or more • See instructions in Programming • Make sure that the channels are not programming channels do universal remote controls blocked. See Blocking unrated TV your existing not display. page 33.
Adjusting the TV picture on page 39. page 45. • If you have connected an HDMI CEC • If the device is not an Insignia audio receiver, adjust the volume on device, it may not be compatible the receiver. When your TV detects with your TV.
Page 74
INlink device. See the documentation that menu. came with the device. • If the device is not an Insignia device, it may not be compatible with your TV. Note If the problem is not solved by using these My device •...
NS-28D220NA16 28" 720p 60Hz, LED TV Specifications Inputs 2 (side) Specifications are subject to change without notice. EDID compliant HDMI HDCP compliant Dimensions and weight Component video 1 (back) 15.4 x 25.3 x 3.3 in. (39.1 x 64.2 x 8.3 cm)
Energy Star encouraged to try to correct the interference by one or more of the Your Insignia TV is ENERGY STAR® qualified in the “Energy following measures: Savings” mode. It meets strict energy efficiency guidelines set by •...
Insignia repair center or store personnel, WARRANTY ON THIS PRODUCT, INCLUDING, BUT NOT LIMITED TO, Insignia will (at its sole option): (1) repair the Product with new or LOST DATA, LOSS OF USE OF YOUR PRODUCT, LOST BUSINESS OR rebuilt parts;...