Component Video (Better) - Insignia NS-28D220NA16 User Manual

NS-28D220NA16 28" 720p 60Hz, LED TV

Component video (better)

Note
Cables are often color-coded to match color-coded jacks.
On your TV
Component Audio cable
video cable connectors
connectors
Component Analog
video jacks audio jacks
1 Make sure that your TV's power adapter is unplugged and all connected devices are turned off.
2 Connect the incoming cable from the cable wall jack to the cable-in jack on the cable or satellite box.
3 Connect a component video cable (not provided) to the VIDEO / Y, P
component video out jacks on the cable or satellite box.
4 Connect an audio cable (not provided) to the L and R AUDIO jacks on the back of your TV and to the audio out jacks
on the cable or satellite TV box.
Important
5 Plug your TV's power adapter into a power outlet, turn on your TV, then turn on the cable or satellite box.
6 Press INPUT to open the INPUT SOURCE list.
 
7 Press or to highlight Component/AV, then press ENTER.
• The VIDEO / Y, P , and P
B
device) share the L and R AUDIO jacks with the VIDEO / Y jack (used to
connect an AV device). You can only connect one component video or
AV device at a time. We suggest upgrading to HDMI if your cable or
satellite box supports it.
• When you connect the audio using the L and R AUDIO jacks, the audio
output is analog.
www.insigniaproducts.com
Audio cable
B
video jacks (used to connect a component
R
satellite box
Component
video cable
Back of TV
, and P jacks on the back of your TV and the
R
Cable or
Cable
wall jack
15