Connecting A Cable Or Satellite Box; Hdmi (Best) - Insignia NS-28D220NA16 User Manual

Connecting a cable or satellite box

Many cable or satellite TV boxes have more than one connection type. To get the best video, you should use the best
connection type available. For more information, see
You can connect your cable or satellite box using:

• HDMI (best)

• Component video (better)
• AV (composite video) (good)
• Coaxial (good)
HDMI (best)
On your TV
HDMI cable
connector
HDMI jack
1 Make sure that your TV's power adapter is unplugged and all connected devices are turned off.
2 Connect the incoming cable from the cable wall jack to the cable-in jack on the cable or satellite box.
3 Connect an HDMI cable (not provided) to an HDMI jack on the side of your TV and to the HDMI OUT jack on the
cable or satellite box.
4 Plug your TV's power adapter into a power outlet, turn on your TV, then turn on the cable or satellite box.
5 Press INPUT to open the INPUT SOURCE list.
 
6 Press or to highlight HDMI 1 or HDMI 2, then press ENTER.
Note
An HDMI cable carries both audio and video. You do not need to use any
audio cables.
14
Cable or
satellite box
HDMI cable
Cable wall
jack
www.insigniaproducts.com
What connection should I use?
Side of TV
28" 720p 60Hz, LED TV
on page 13.