Connecting A Cable Or Satellite Box; Using Hdmi (Best) - Insignia NS-40D40SNA14 User Manual

Connecting a cable or satellite box

Many cable or satellite TV boxes have more than one connection type. To get the best video, you should use the
best connection type available. For more information, see

Using HDMI (best)

On your TV
HDMI cable
connector
HDMI jack
To connect a cable or satellite box using HDMI:
1 Make sure that your TV's power cord is unplugged and all connected equipment is turned off.
2 Connect the incoming cable from the cable wall jack to the cable-in jack on the cable or satellite box.
3 Connect an HDMI cable (not provided) to one of the HDMI jacks on the side or back of your TV and to the HDMI
OUT jack on the cable or satellite box.
4 Plug your TV's power cord into a power outlet, turn on your TV, then turn on the cable or satellite box.
5 Press INPUT to open the INPUT SOURCE list.
6 Press or to highlight HDMI 1, HDMI 2, or HDMI 3, then press ENTER.
Note
An HDMI cable carries both audio and video. You do not need to use any
audio cables.
12
Cable or
satellite box
www.insigniaproducts.com
NS-40D40SNA14 Insignia 40" LED TV
"What connection should I
Side of TV
HDMI cable
use?" on page 11.