Vcr Playback - Sanyo HV-DX350A Instruction Manual

Dvd player + video cassette recorder
Hide thumbs Also See for HV-DX350A:
Table of Contents

Advertisement

VCR Playback

If the product, which
has a auto-detector,
detects a
contaminated head(s),
it shows the
conditions to notice
the contamination on
screen.
Press [
] button to power on.
1
Press [VCR] button of remote control to change into VCR mode.
Insert the desired tape.
2
If you want to playback it, press [PLAY/PAUSE] button.
3
When the operational status is flickering or poor, adjust it with [TRACKING +/-]
button.
To stop it, press [
4
If you want to stop playback, press [STOP] button.
Press [EJECT] button in the front part or [OPEN/CLOSE] button on remote
5
control to remove the tape.
Various Playback Methods
If you want fast forward (or reverse) playback, press [√ √ √ √ ] or [œ œ œ œ ] button in
Playback mode. You can watch fast playing (rewinding) screen.
* NOTE: You might see no color noise band when you fast forward (or reverse)
playback the tape which is recorded in LP mode.
If you want Still picture, press [PLAY/PAUSE] in Playback mode. You can watch the
desired screen in pause status.
If you want slow-motion playback, press [√ √ √ √ ] button in Pause mode. You can
watch the desired screen in the slow forward playback.
* NOTE: VCR doesn't have Slow Reverse Playback function.
If you want to watch a series of screens one by one, (FRAME ADVANCE) press
[NEXT √ √ √ √ ] button in Pause mode. Each time you press this button, the picture
advances one frame.
If you press [REPLAY] button in playback mode, the player quickly rewinds 15
seconds of the tape and plays it.
If you press [CM SKIP] button in playback mode, the player quickly skips 30
seconds of the tape and plays it.
To Adjust Display
This product includes automatic Tracking function and enables users to enjoy clear picture
without an additional operation. Provided that the following problems can be solved by
the manual adjustment, which improves display quality. (During automatic display
adjustment, "Adjusting Display" are displayed on TV screen.)
- If the screen is poor in Playback mode,
- If noises occur in the upper or lower part of screen in slow playback mode,
- If paused picture vibrates up and down.
Use [TRACKING +/-] buttons of remote control to adjust the display suitable for watching.
] button.
23
23

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents