Table of Contents
Advertisement
Please note :
• Most instructions in this manual refer to remote control use.
• This unit will automatically turn on the screen saver after 5 minutes of inactivity and into the standby mode after 25 minutes
of inactivity.
Playback
Before:
Turn on the TV, amplifier and any other device(s) which are
connected to this unit. Make sure the TV and audio receiver
(not included) are set to the correct channel/Input.
[CD]
[DVD]
(
on page 12
[JPEG]
1
Press [ y ] to turn on this unit.
2 Press [ A ] and insert a disc
with label facing up.
3 Press [ B ] to start playback.
4 Press [ C ] to stop playback.
Disc menu
[DVD]
Some discs contain menus which allow you to customize DVD
playback. Use [K / L / 0 / 1] to select an item, then press [OK],
[ B ] (on the unit).
Calling up a menu screen during playback
[DVD]
• Press [MENU] to call up the disc menu.
• Press [TOP MENU] to call up the title menu.
Note(s):
• Menu operations may vary depending on the disc.
Refer to the manual accompanying the disc for more details.
Resume playback
[DVD]
[CD]
Press [ C ] during playback. PRE STOP icon
will appear at the top-left on the TV screen.
Press [ B ]. RESUME icon will appear at the
top-left on the TV screen and playback will
resume from the Point where playback was
stopped.
Note(s):
• To cancel resume, press [ C ] one more time in the stop
mode.
• The resume playback information stays in unit memory
even when the power is turned off, as long as the disc
stays in the unit.
Pause and step-by-step playback
[DVD]
[CD]
[JPEG]
Press [ F ] during playback.
To continue playback, press [ B ].
[DVD]
The disc goes forward by one frame each time [ F ] (on the
remote control) is pressed in the pause mode.
To continue playback, press [ B ].
EN
DVD FUNCTIONS
)
2
2
1
3
4
PRE STOP
Note(s):
• When you play back a DVD or CD-R/-RW with JPEG Files,
refer to details on page 12.
• "
This operation is not available." may appear at the top-
left on the TV screen when the operation is prohibited by
the disc or this unit.
• Some DVD may start playback from title 2 or 3 due to
specific programs.
• During the playback of a 2-layered disc, pictures may stop
for a moment. This happens while the 1st layer is being
switched to the 2nd layer. This is not a malfunction.
• You can change the on-screen language in "Menu" setting.
(Refer to page 18.)
Fast forward / Reverse search
[CD]
[DVD]
Use [ g ] or [ h ] repeatedly during
Playback to select the required forward or
reverse speed.
To continue playback, press [ B ].
Note(s):
• Fast forward or reverse search speed is different depending
on the disc. Approximate speed is ×2, ×4, ×8 and ×20.
Slow forward search
[DVD]
Press [ g ] repeatedly in the pause mode
to select the required forward speed.
To continue playback, press [ B ].
Note(s):
• Slow forward speed is different depending on the disc.
Approximate speed is ×1/2, ×1/4 and ×1/8.
Zoom
[DVD]
[JPEG]
1) Press [ZOOM] repeatedly during playback
to select the required zoom factor:
×1.5, ×2 or ×2.5.
2) Use [K / L / 0 / 1] to slide the zoomed
picture across the TV Screen.
3) To exit the zoom function, press [ZOOM] repeatedly to
select "ZOOM 1"(Off).
Note(s):
• Zooming function does not work while the disc menu is
displayed.
• Some part of the picture may not be zoomed depending
on the disc or playback status.
– 11 –
Lights up when power is On.
2
1
X2
SF 1/2
ZOOM 2
Advertisement
Table of Contents
