Audio Setup - Sanyo HV-DX350A Instruction Manual

Audio Setup

A user may select audio menu according to a user's speaker set.
52
While STOP or Resume STOP, press [SETUP]
1
button.
Select the Digital Output.
2
Set audio output to coaxial. You can set the
outgoing digital signal to BITSTREAM or LPCM:
• BITSTREAM : The raw audio signal recorded
on the disc goes to the digital audio output.
• LPCM : The decoded audio signal goes to
the digital audio output.
Select the Dynamic Range.
3
You can set the Dynamic Range using the [...†]
button.
• Off : You can hear the sound as it was
originally recorded on the disc.
• Full : You can hear loud sounds softer and
soft sounds louder.
DIGITAL OUT BITSTREAM
LANGUAGE
DYNAMIC RANGE
VIDEO
AUDIO
OTHERS
ENTER SETUP
DIGITAL OUT BITSTREAM
LANGUAGE
DYNAMIC RANGE LPCM
VIDEO
AUDIO
OTHERS
SETUP
ENTER
DIGITAL OUT
LANGUAGE FULL
DYNAMIC RANGE
3/4
VIDEO
1/2
AUDIO
1/4
OTHERS
OFF
SETUP
ENTER