Connecting Your Player With A Rf Lead - Sanyo HV-DX350A Instruction Manual

Connecting your player with a RF lead

Before you start, unplug all the equipment from the mains supply.
(Option 1) - How to connect with RF lead
OUTSIDE ANTENNA OR
WALL ANTENNA OUTLET
Aerial
The type of aerial you should use,
depends on local interference and
how far you are from the
transmitter. You should contact a
local retailer if you have any
questions about your aerial.
¡
Remove circular cable (RF cable) (surplus cable) plugged in "ANT.IN" jack in rear panel of TV.
Connect the cable to "ANT" jack in rear panel of DVD-Video.
™
Connect TV to DVD-Video. Connect "TV" jack in DVD-Video with "ANT.IN" jack in TV with RF
cable.
In option (1) you need to tune your television to the player so you can see the picture from the player. When it
is on the player generates a signal on UHF transmission channel 36, but this might change after tuning in the
stations with 'AUTO-SEARCH' . See the 'Check it out' box on page 18. See your television manual for how to
tune in a new channel.
12 12
REAR PANEL OF DVD-VIDEO
REAR PANEL OF TV
INPUT 1 INPUT 2
ANT IN
RF CABLE