Sanyo HV-DX350A Instruction Manual page 21

Initial Installation
If the clock has not been set, the clock setting screen will appear.
5
Please see "Setting time and date" on page 20.
If other stations are positioned on near the current RF OUTPUT CH,
6
the guide message appears automatically.
The player recommends the optimal RF OUTPUT CH number
automatically.
Press the [OK] button to confirm the recommended RF channel.
7
Should you wish the stations to have the same numbers as those
used on the TV, follow the instructions in "Sorting programme
locations" on page 28.
Else ...
exit the basic installation function and enjoy your player.
• If the signal from the player is coming into the TV through
the RF lead, the picture will disappear when you press OK at
step 8. You will need to re-tune your television to the new
UHF transmission channel.
Should you wish the stations to have the same numbers as those
8
used on the TV, follow the instructions in "Sorting programme
locations" on page 28.
Else ...
Press the SETUP button to exit the set-up menu and enjoy your
player
Up [PR+], down [PR-], OK and 'confirm'
• Notice the on-screen prompts which the video recorder generates to tell you which button to press.
In general the up and down 'navigation' buttons select or highlight something and the OK button
confirms it .
• [PR+] and [PR-] are the same buttons as 'up' and 'down'.
• In the DVD section it is usually the left and right buttons which 'select'.
CLOCK SET
TIME - - : - -
DATE - - / - - /- - - -
0-9:SETUP (HOUR)
/ :CORRECT SETUP:END
RF OUTPUT SET
CURRENT CH 36
RECOMMENDED CH 34
0-9:SELECT(21-69)
OK:CONFIRM SETUP:END
IMPORTANT!
PLEASE CHANGE THE TV
CH TO 34.
MANUAL SET
PR01 P-01 PR08 P-08
PR02 P-02 PR09 P-09
PR03 P-03 PR10 P-10
PR04 P-04 PR11 P-11
PR05 P-05 PR12 ----
PR06 P-06 PR13 ----
PR07 P-07 PR14 ----
PR+/-:SELECT
OK:CONFIRM SETUP:END
19 19