Table of Contents
Advertisement
Fill Tank
You will use the Fill Tank command when calibrating a fuel flow and
when filling up the tank without calibration.
Adding Fuel to Tank
Tank Location, Fuel Added and Add Fuel commands work together to
keep NMEA 2000 fuel data consistent with the actual amount of fuel
added to the fuel tank(s).
1. Press
MENU
2. The NMEA 2000 menu will appear with five options: Bus Setup,
Fuel Management, NMEA 2000 Alarms, Waypoint Sharing and Back-
light Synchronization. Select
3. Highlight
T
appear with up to three options: Port, Center and Starboard.
4. Select the tank you added fuel to and press
5. Follow the steps below that apply to your tank.
If you filled up the tank:
A. Press the
F
appear: Are you sure you wish to Fill Tank? Press
sage will appear: Do you wish to re-calibrate the device? Highlight
and press
ENT
If you did not fill up the tank:
B. Highlight
box. Use ↑ ↓ , ← → to input the amount of fuel added to the tank and
press
. Select the
ENT
sage will appear: Are you sure you wish to Add Fuel? Highlight
press
.
ENT
6. Press
repeatedly to get back to the main display.
EXIT
Engine Operations
The lower half of the Fuel Management menu contains the following
Engine Operation functions: Engine Select, Reset Calibration, Reset
Trip and Reset Seasonal.
Engine Select
Engine Select allows you to choose the desired engine when resetting
calibration, resetting trip fuel and resetting seasonal fuel.
To Reset Calibration:
Choosing the Reset Calibration command will switch fuel flow calibra-
tion settings back to factory defaults.
1. Press
MENU
|
, select
MENU
and press
L
ANK
OCATION
button and press
T
ILL
ANK
.
and press
F
A
UEL
DDED
A
F
DD
UEL
|
, select
MENU
and press
NMEA 2000
F
M
UEL
ANAGEMENT
. The Tank Location menu will
ENT
ENT
to access the
ENT
button and press
and press
NMEA 2000
131
.
ENT
and press
ENT
.
ENT
. The following message will
. Another mes-
ENT
F
UEL
. The following mes-
ENT
.
ENT
.
N
O
dialog
A
DDED
and
Y
ES
Hide quick links:
Advertisement
Table of Contents
