All datums are named. The GPS system is based on the WGS-84
datum, which covers the entire world. Other datums may also cover the
entire world, or just a small portion of it. By default, your unit uses the
WGS-84 datum. It, however, can show your position using one of 191
different datums. To change the datum:
1. Press
to
|
to
|
MENU|MENU|↓
GPS S
ENT|↓
D
S
ENT.
ETUP
ATUM
ELECTION
↓
↑
2. Scroll
or
to select the desired datum, then press
ENT.
To return to the last page displayed, press
3.
EXIT|EXIT.
A list of the datums used by this unit is in the back of this manual.
GPS Setup Menu (left); Map Datum Menu (right).
Map Detail Category Selection
This menu determines which of the mapping features are shown on the
screen. This includes, waypoints, trails, icons, cities, highways, etc. You
can select any of these items, customizing the map to your needs.
To get to Map Categories:
1. From the Map Page, press
to
MENU|↓
M
C
D
|ENT.
AP
ATEGORIES
RAWN
to select a category or press → then press ↑ or ↓ to select
↑
↓
Press
or
2.
a subcategory. Press
to turn it off (no check) or on (checked.)
ENT
. To return to the last page displayed, press
3
EXIT|EXIT.
152