Depth Cursor; Depth Range - Automatic - Lowrance LCX-104C Operation Instructions Manual

Depth Cursor

The depth cursor consists of a horizontal line with a digital depth box on
the right side. The numbers inside the box show the depth of the cursor.
At left, Sonar Page menu with Depth Cursor command selected. At
right, sonar chart with the depth cursor active. The line indicates the
The cursor can be moved to any location on the screen, letting you pin-
point the depth of a target.
1. From the Sonar Page, press
2. The depth cursor appears. Press ↓ to lower the cursor line; press ↑ to
raise the cursor line.
3. To clear the depth cursor, press

Depth Range - Automatic

When turned on for the first time, the bottom signal is automatically
placed in the lower half of the screen. This is called Auto Ranging and
is part of the automatic function. However, depending upon the bottom
depth and the current range, you can change the range to a different
depth. To do this:
1. From the Sonar Page, press
large fish is 21.95 feet deep.
MENU
EXIT
MENU
60
Cursor line
|↓ to
D C
EPTH URSOR
.
|↓ to
D R
EPTH ANGE
Depth box
| .
ENT
| .
ENT