Navigate A Route In Reverse - Lowrance GlobalMap 7000C Operation Instructions Manual

Navigate a Route in Reverse

Here's how you run a route backward, from the end waypoint to the
beginning waypoint:
1. From the
press |
MENU MENU
2. Press ↓ to select route name|
| |← to
ENT
VERSE
3. Upon arrival at your destination, cancel navigation:
press |
MENU MENU
Navigating along a route: Fig. 1 shows the Navigation Page at the start
of a route, heading straight for the first waypoint (Wpt 1). In Fig. 2, the
traveler has arrived at Wpt 1; the arrival alarm has been triggered and
the bearing arrow on the compass rose has turned to point toward Wpt
2, off to the east. In Fig. 3 the traveler has turned east on his new
course and is heading straight for Wpt 2, which is 2.15 miles away. Fig.
4 shows route navigation on the Map Page. In this figure, the traveler
has reached Wpt 2 and is half-way along the leg between Wpts 2 and 3.
N P
AVIGATION AGE
|↓ to
R
OUTE
|
N ENT
AVIGATE
|↓ to
C
ANCEL
Figure 1.
Figure 3.
, press
MENU
|
P ENT
LANNING
ENT
.
|
N
AVIGATION
60
| or from the
ENT
.
|↓ to
N
AVIGATE
← to Y
| |
ENT
ES
Figure 2.
Figure 4.
M P
AP AGE
|→ to
R
E-
.
ENT
,