Lowrance GlobalMap 7000C Operation Instructions Manual page 113

Waypoint Information screens with the Go To Waypoint command se-
lected, left, and the Find on Map command selected, right.
To clear these menus and return to the previous page, press
peatedly.
5. If you're looking by name, there are two options: A. You can spell
out the name in the top selection box. Press ↑ or ↓ to change the first
letter, then press → to move the cursor to the next letter and repeat
until the name is correct, then press
down to the lower selection list by pressing
select a waypoint from the list, then press
tion screen appears.
Find By Name menu, left. Waypoint Information screen, center. At right,
the found waypoint is highlighted by the cursor on the Map Page.
A. To navigate to the waypoint, press
mand is already highlighted.) The unit will show navigation infor-
mation to the waypoint.
B. To find the waypoint, press ↓ to
pears with the cursor highlighting the found waypoint.
To clear these menus and return to the previous page, press
peatedly.
|
ENT ENT
ENT
. The waypoint informa-
ENT
. (Go To Waypoint com-
ENT
|
F ENT
IND
107
. B. Or you can jump
, then press ↓ or ↑ to
. The Map Page ap-
re-
EXIT
re-
EXIT