Once in the Sounds menu:
To set Key Press Sounds: With the option highlighted, press
check it (turn on) and uncheck it (turn off). After the option is set, press
|
to return to the page display.
EXIT
EXIT
To set Alarm Sounds: Press ↓ to
lighted, press
the option is set, press
To set Alarm Volume: Press ↓ to
bar. The left end of the scale is low volume; the right end is high volume.
After the option is set, press
To set Alarm Style: Press ↓ to
change the style, then press
|
to return to the page display.
EXIT
EXIT
Track Smoothing
This is a factory setting on the GPS Setup menu that should always be
left on. When stopped or traveling at slow speeds (such as walking or
trolling), Track Smoothing prevents wandering of trails, the steering
arrow, compass rose and a map in track-up mode.
Trail Options
There are several options you can use with trails. Some affect all trails,
other options can be applied to a particular trail. You can change the
way trails are updated, you can display or hide trails, create a new
trail, delete a trail, etc.
General Trail Options
To access the Trails Menu:
Press
|
MENU
MENU
to check it (turn on) and uncheck it (turn off). After
ENT
|
EXIT
Track Smoothing option, turned on.
|↓ to
M
T
Y
A
S
LARM
to return to the page display.
EXIT
. Press → or ← to move the
V
OLUME
|
to return to the page display.
EXIT
EXIT
A
S
LARM
TYLE
. After the option is set, press
ENT
|
.
ENT
RAILS
91
With the option high-
.
OUNDS
. Press ↑ or ↓ to
|
ENT
to
ENT