Lowrance GlobalMap 7000C Operation Instructions Manual page 56

The Transfer My Data submenu asks if you want to save data to the
MMC or load data from the MMC into the GlobalMap 7000C's memory.
2. The Transfer My Data menu includes a message which tells you if an
MMC is present or not. If no MMC is present, you must first insert a
card into the GlobalMap 7000C in order to activate the Load or Save
commands.
To transfer data from the GlobalMap 7000C to the MMC: press
(for
ENT S
AVE
To transfer data from the MMC to the GlobalMap 7000C: press
→ to
|
L
OAD
3. Saving to MMC: To accept the default name "Data" for the GPS
Data File, press ↓ to
shown in the following figures), press
Press ↑ or ↓ to change the first character, then press → to the next
character and repeat until the name is correct. Then, press
|
S D ENT
AVE ATA
The unit will display first a progress then a completion message when
the data transfer is finished. To return to the Page view, repeatedly
press .
EXIT
.)
.
ENT
S D
AVE
.
| . If you wish to rename the file (as
ENT
ATA
ENT
50
to activate the selection box.
|↓ to
ENT