Removing The Memory Fan; Prerequisites; Procedure - Alienware Area-51 R2 Service Manual

Removing the Memory Fan

WARNING: Before working inside your computer, read the
safety information that shipped with your computer and
follow the steps in
After working inside your computer, follow the instructions
in After Working Inside Your
practices, see the Regulatory Compliance home page at
dell.com/regulatory_compliance.

Prerequisites

1
Remove the
2 Remove both the left and right side-panels. See
Panels".

Procedure

1 Lay the computer on the right side.
2
Disconnect the memory-fan cable from the connector on the system
board. For more information on the memory-fan cable connector, see
"System Board
3 Remove the screw that secures the memory fan on the chassis.
4
Pull the release tab away from the chassis and move the fan towards the
right side.
Before Working Inside Your
stability foot.
Components".
Computer. For more safety best
"Removing the Side
Computer.
89