Replacing The Wireless Card; Procedure; Post-Requisites - Alienware Area-51 R2 Service Manual

Replacing the Wireless Card

WARNING: Before working inside your computer, read the
safety information that shipped with your computer and
follow the steps in
After working inside your computer, follow the instructions
in After Working Inside Your
practices, see the Regulatory Compliance home page at
dell.com/regulatory_compliance.

Procedure

1
Align the notch on the wireless card with the tab on the wireless-card slot.
2 Insert the wireless card at an angle into the connector.
3
Push the securing tab out and secure the wireless card into position.
4 Connect the antenna cables to the wireless card.
A label at the tip of the antenna cables indicates color scheme for the
wireless card supported by your computer.
Connectors on the wireless card
Auxiliary (1)
Main (2)

Post-requisites

1
If you have multiple graphics cards, replace the graphics card. See
"Replacing the Graphics
2
Replace both the left and right side-panels. See
Panels".
3
Replace the stability
112
Before Working Inside Your
Computer. For more safety best
Card".
foot.
Computer.
Antenna-cable sticker
color
Black
White
"Replacing the Side