Removing The Logo Board; Prerequisites; Procedure - Alienware Area-51 R2 Service Manual

Removing the Logo Board

WARNING: Before working inside your computer, read the
safety information that shipped with your computer and
follow the steps in
After working inside your computer, follow the instructions
in After Working Inside Your
practices, see the Regulatory Compliance home page at
dell.com/regulatory_compliance.

Prerequisites

1
Remove the
2 Remove both the left and right side-panels. See
Panels".
3 Remove the

Procedure

NOTE: Note the routing of all cables as you remove them so that you can
reroute them correctly after you replace the logo board.
1
Lay the chassis on the left side.
2 Disconnect all the cables from the connectors on the logo board.
3
Remove the screw that secure the logo board to the chassis.
Before Working Inside Your
stability foot.
memory fan.
Computer. For more safety best
"Removing the Side
Computer.
113