Removing The Wireless Card; Prerequisites; Procedure - Alienware Area-51 R2 Service Manual

Removing the Wireless Card

WARNING: Before working inside your computer, read the
safety information that shipped with your computer and
follow the steps in
After working inside your computer, follow the instructions
in After Working Inside Your
practices, see the Regulatory Compliance home page at
dell.com/regulatory_compliance.

Prerequisites

1
Remove the stability foot. See
2 Remove both the left and right side-panels. See
Panels".
3 If you have multiple graphics cards installed, remove the graphics card.
See "Removing the Graphics

Procedure

1 Lay the computer on the left side.
2
Disconnect the antenna cables from the wireless card.
3 Remove the screw that secures the wireless card to the chassis.
110
Before Working Inside Your
Computer. For more safety best
"Removing the Stability
Card".
Computer.
Foot".
"Removing the Side